Customized Molded Nr EPDM Rubber Bushing for Auto, Machinery Equipment

Rubber bumper is vulcanized with various of material, such as EPDM, NR,SBR etc.
With Good resistance to seasonality, heat resistance, chlorination resistance, aging resistance.
Inside stainless steel and It has a very good damping effect.
Are widely applied in any area, such as furniture, Chassis instrument etc
 
Production Description 

The advantage and property of rubber bumper/feet from our factory
1.Built-in stainless steel sheet inside
 Make rubber bumper more stable and stronger inside stainless steel sheet .
2.We adopt heighten new technology craft
3.The material of rubber bumper is complete fresh and tasteless
4.Not fade, anti-slip wear-resistant anti - pressure , damping, acid and alkali resistant
5. Environment friendly

The different material of rubber mounting will cause different property.
EPDM/NBR/silicone/SBR/PP/PVC etc.

1. the property of NR
 It has good wear resistance, high elasticity, breaking strength and elongation, But in the air, it is easy to get age, and it is get sticky when it get in touch with heat, which is easy to expand and dissolve in mineral oil or gasoline, but it is resistant to strong acid, but not to Alkali . working temperature is -50~70ºC.
2. the property of EPDM
Weather ability, aging resistance, ozone resistance, chemical stability are excellent, and CFCS and a variety of refrigerants. Working temperature is -50~150
3. the property of silicone
It has excellent heat resistance, cold resistance, ozone resistance and atmospheric aging resistant.Good electrical insulation performance,The tensile strength and wear resistance are generally poor and has non- oil resistant. The working temperature is -55~250ºC
4. The property of NBR
Good oil resistance, heat resistance, abrasion resistance, solvent resistance and high - pressure oil,But it is not suitable for polar solvents, such as ketones, ozone, nitro-hydrocarbons, and chloroform. The working temperature is -40~120 ºC
5. the property of CR
It has good elasticity, wear resistance and atmospheric aging resistance. It is not afraid of violent distortion and flammability.Chemical stability. The working temperature is -40~100 ºC
6. The property of FKM
Excellent high temperature resistance,And have excellent chemical resistance, most oil and solvent (other than ketones and esters).cold resistance is not good.
 


The advantage of our company
1.We have excellent complete production line with advanced production and test equipment
 Adding First-class technicians, so that we can  offer you the competitive price and high quality ,fast delivery time .
2.We have a special drawing design department to design the correct drawing data meeting your requirements. Then, we will use CAD or other format drawing to carry on tracking the production of tooling, sample ,mass goods. To avoid something wrong to each process. To make sure all of dimension are correct.
3.We also has special production supervision department. The engineer staff will Supervise  each process from the manufacture of tooling to the production of mass goods.
Reduce something wrong happened, finally offer you parts meeting your technology requirement.
4. All of Raw material are past quality certification,In the meantime, we will first delivery test report of rubber part when all of mass goods are finished. And make sure the quality meet your requirement, then make shipment.

 Packing and shipment

• one part is packaged with one plastic bag, then certain quantity of mounting are put into carton box.
• Carton box insider rubber mounting is with packing list detail. Such as, item name, the type number of rubber mounting, quantity of rubber mounting, gross weight,net weight, dimension of carton box,etc
• All of carton box will be put on one non-fumigation pallet, then all carton boxes will be wrapped by film.
• We have our own forwarder which has Rich experience in delivery arrangement to optimize the most economic and quickest shipping way, SEA,  AIR,  DHL, UPS ,FEDEX, TNT , etc.
• Why choose us?
• 1.Product: we specialize in rubber molding,injection and extruded rubber profile.
     And complete advanced production equipment and test equipment
  2.High quality:100% of the national standard has been no product quality complaints
  the materials are environmentally friendly and the technology reaches the international advanced level
  3.The competitive price:we have own factory, and the price is directly from factory. In additional,perfect advanced production equipment and enough staff. So the price is the best.
  4.Quantity :Small quantity is available
  5.Tooling:Developing tooling according to drawing or sample, and solve all of questions
  6.Package: all of package meet standard internal export package, carton outside, inside plastic bag for each part; as your requirement
  7.Transport:We have our own freight forwarder which can guarantee our goods can be delivered safely and promptly by sea or air
  8.Stock and delivery:Standard specification,lots of stocks, and fast delivery
  10. Service:Excellent service after-sales
   
• Common Questions
• What is the minimum order quantity for your rubber products?
• Answer:We didn't set the minimum order quantity,1~10pcs some client has ordered.
• If we can get sample of rubber product from you?
•  Answer:Of course, you can. Feel free to contact me about it if you need it.
• Do we need to charge for customizing our own products? And if it is necessary to make tooling?
• Answer: if we have the same or similar rubber part, at the same time, you satisfy it.
   Well, you don't need to open tooling
  New rubber part, you will charge tooling according to the cost of tooling.
  In additional,if the cost of tooling is more than 1000 USD, we will return all of them to you in the future when purchasing order quantity reach certain quantity our company rule
• How long you will get sample of rubber part?
• Answer: Usually it is up to complexity degree of rubber part. Usually it take 7 to 10work days.
• How many your company product rubber parts?
•  Answer:It is up to the size of tooling and the quantity of cavity of tooling. If rubber part is more complicate and much bigger, well maybe just make few, but if rubber part is small and simple, the quantity is more than 200,000pcs.
• Silicone part meet environment standard?
• Answer:Our silicone part are all high grade 100% pure silicone material. We can offer you certification ROHS and SGS, FDA .Many of our products are exported to European and American countries. Such as: Straw, rubber diaphragm, food mechanical rubber, etc.
   
• About US
  These years, We are working on various project of customers and long term working in rubber industry. We have faith in giving your professional advice on your particular project.
  At present, our market have been expanded to more than 30 countries, and still growing.
  First we will get drawing or sample from our client to check their design. If there is no drawing or sample, we will ask some question about product concept and design idea.
  Then according to what application environment of rubber part, we will help design drawing and what raw material is best for rubber part. OEM parts are ok for us.
   
  We can meet your requirement of the design and use for different shapes and material,
   And high/low temperature, foam/sponge or solid rubber profile, fire resistance and special property of any rubber profile and molding rubber part
  
  FAQ
  1. Are you factory or trade company?
  We  specialize in manufacturing rubber and plastic manufacturer, founded in 2004
  2. What's the order process?
  A: Inquiry---provide us all clear requirements, such as drawing with detail technical data, or original sample
  B: Quotation---official quotation sheet with all detail specifications including price terms,shipment terms,etc
  C: Payment terms---100% prepaid the cost of tooling before making new sample
                  T/T 30% in advanced, and the balance according to the copy of the B/L
  D:Develop tooling---open the mould according to your requirement
  E:Sample confirmation---send you the sample for confirmation with test report from us
  F:Production---mass goods for order production
  G:Shipping--- by sea, air or courier. Detailed picture of package will show you.
   
  3. What other terms of payment you use?
     PayPal, Western Union

Rubber bumper is vulcanized with various of material, such as EPDM, NR,SBR etc.
With Good resistance to seasonality, heat resistance, chlorination resistance, aging resistance.
Inside stainless steel and It has a very good damping effect.
Are widely applied in any area, such as furniture, Chassis instrument etc
 
Production Description 

The advantage and property of rubber bumper/feet from our factory
1.Built-in stainless steel sheet inside
 Make rubber bumper more stable and stronger inside stainless steel sheet .
2.We adopt heighten new technology craft
3.The material of rubber bumper is complete fresh and tasteless
4.Not fade, anti-slip wear-resistant anti - pressure , damping, acid and alkali resistant
5. Environment friendly

The different material of rubber mounting will cause different property.
EPDM/NBR/silicone/SBR/PP/PVC etc.

1. the property of NR
 It has good wear resistance, high elasticity, breaking strength and elongation, But in the air, it is easy to get age, and it is get sticky when it get in touch with heat, which is easy to expand and dissolve in mineral oil or gasoline, but it is resistant to strong acid, but not to Alkali . working temperature is -50~70ºC.
2. the property of EPDM
Weather ability, aging resistance, ozone resistance, chemical stability are excellent, and CFCS and a variety of refrigerants. Working temperature is -50~150
3. the property of silicone
It has excellent heat resistance, cold resistance, ozone resistance and atmospheric aging resistant.Good electrical insulation performance,The tensile strength and wear resistance are generally poor and has non- oil resistant. The working temperature is -55~250ºC
4. The property of NBR
Good oil resistance, heat resistance, abrasion resistance, solvent resistance and high - pressure oil,But it is not suitable for polar solvents, such as ketones, ozone, nitro-hydrocarbons, and chloroform. The working temperature is -40~120 ºC
5. the property of CR
It has good elasticity, wear resistance and atmospheric aging resistance. It is not afraid of violent distortion and flammability.Chemical stability. The working temperature is -40~100 ºC
6. The property of FKM
Excellent high temperature resistance,And have excellent chemical resistance, most oil and solvent (other than ketones and esters).cold resistance is not good.
 


The advantage of our company
1.We have excellent complete production line with advanced production and test equipment
 Adding First-class technicians, so that we can  offer you the competitive price and high quality ,fast delivery time .
2.We have a special drawing design department to design the correct drawing data meeting your requirements. Then, we will use CAD or other format drawing to carry on tracking the production of tooling, sample ,mass goods. To avoid something wrong to each process. To make sure all of dimension are correct.
3.We also has special production supervision department. The engineer staff will Supervise  each process from the manufacture of tooling to the production of mass goods.
Reduce something wrong happened, finally offer you parts meeting your technology requirement.
4. All of Raw material are past quality certification,In the meantime, we will first delivery test report of rubber part when all of mass goods are finished. And make sure the quality meet your requirement, then make shipment.

 Packing and shipment

• one part is packaged with one plastic bag, then certain quantity of mounting are put into carton box.
• Carton box insider rubber mounting is with packing list detail. Such as, item name, the type number of rubber mounting, quantity of rubber mounting, gross weight,net weight, dimension of carton box,etc
• All of carton box will be put on one non-fumigation pallet, then all carton boxes will be wrapped by film.
• We have our own forwarder which has Rich experience in delivery arrangement to optimize the most economic and quickest shipping way, SEA,  AIR,  DHL, UPS ,FEDEX, TNT , etc.
• Why choose us?
• 1.Product: we specialize in rubber molding,injection and extruded rubber profile.
     And complete advanced production equipment and test equipment
  2.High quality:100% of the national standard has been no product quality complaints
  the materials are environmentally friendly and the technology reaches the international advanced level
  3.The competitive price:we have own factory, and the price is directly from factory. In additional,perfect advanced production equipment and enough staff. So the price is the best.
  4.Quantity :Small quantity is available
  5.Tooling:Developing tooling according to drawing or sample, and solve all of questions
  6.Package: all of package meet standard internal export package, carton outside, inside plastic bag for each part; as your requirement
  7.Transport:We have our own freight forwarder which can guarantee our goods can be delivered safely and promptly by sea or air
  8.Stock and delivery:Standard specification,lots of stocks, and fast delivery
  10. Service:Excellent service after-sales
   
• Common Questions
• What is the minimum order quantity for your rubber products?
• Answer:We didn't set the minimum order quantity,1~10pcs some client has ordered.
• If we can get sample of rubber product from you?
•  Answer:Of course, you can. Feel free to contact me about it if you need it.
• Do we need to charge for customizing our own products? And if it is necessary to make tooling?
• Answer: if we have the same or similar rubber part, at the same time, you satisfy it.
   Well, you don't need to open tooling
  New rubber part, you will charge tooling according to the cost of tooling.
  In additional,if the cost of tooling is more than 1000 USD, we will return all of them to you in the future when purchasing order quantity reach certain quantity our company rule
• How long you will get sample of rubber part?
• Answer: Usually it is up to complexity degree of rubber part. Usually it take 7 to 10work days.
• How many your company product rubber parts?
•  Answer:It is up to the size of tooling and the quantity of cavity of tooling. If rubber part is more complicate and much bigger, well maybe just make few, but if rubber part is small and simple, the quantity is more than 200,000pcs.
• Silicone part meet environment standard?
• Answer:Our silicone part are all high grade 100% pure silicone material. We can offer you certification ROHS and SGS, FDA .Many of our products are exported to European and American countries. Such as: Straw, rubber diaphragm, food mechanical rubber, etc.
   
• About US
  These years, We are working on various project of customers and long term working in rubber industry. We have faith in giving your professional advice on your particular project.
  At present, our market have been expanded to more than 30 countries, and still growing.
  First we will get drawing or sample from our client to check their design. If there is no drawing or sample, we will ask some question about product concept and design idea.
  Then according to what application environment of rubber part, we will help design drawing and what raw material is best for rubber part. OEM parts are ok for us.
   
  We can meet your requirement of the design and use for different shapes and material,
   And high/low temperature, foam/sponge or solid rubber profile, fire resistance and special property of any rubber profile and molding rubber part
  
  FAQ
  1. Are you factory or trade company?
  We  specialize in manufacturing rubber and plastic manufacturer, founded in 2004
  2. What's the order process?
  A: Inquiry---provide us all clear requirements, such as drawing with detail technical data, or original sample
  B: Quotation---official quotation sheet with all detail specifications including price terms,shipment terms,etc
  C: Payment terms---100% prepaid the cost of tooling before making new sample
                  T/T 30% in advanced, and the balance according to the copy of the B/L
  D:Develop tooling---open the mould according to your requirement
  E:Sample confirmation---send you the sample for confirmation with test report from us
  F:Production---mass goods for order production
  G:Shipping--- by sea, air or courier. Detailed picture of package will show you.
   
  3. What other terms of payment you use?
     PayPal, Western Union

LED Plant Grow Light

Products Description

LED Grow Light is the newest trend for indoor growers. Advanced LED Grow Lights use less energy,and create less heat,not only provides intense, effective lighting for indoor gardening but also make the garden cool. Hydroponics,which is a method in high-tech horticulture where plants grow in soil-free nutrient baths,led hydroponic lamp is a perfect example of how science and technology can work together to develop solutions to human problems.

Advantages for led grow light
1. Bring You High Yield
The traditional grow lights, such as HID and HPS can just bring you 0.5 -0.8 gram per watt, no more than 1 gram. But the led grow light can bring you 1-2.5 gram per watt. It's amazing! LEDs in greenhouses deliver same yield as grow lights, using just 25% of the energy. So as for the energy conservation and environmental protection light source, the planters will consider the led grow light as their first choice.

2. Less Heat
While most grow lights are very warm, as HID, so you would need use the fan to solve this problem in summer. LED grow lights are generally moderate in temperature, and they will not harm a person if he touches them. As such, it is much safer and convenient for owners and their crops, they can be placed very close to the plants to deliver high intensity lights to the surface of the leaves.

3. Low Cost On Everything
Less electricity, save about 60% than HID.
Low amounts of heat, means less money spent on the room's costs of cooling.
Long life-span, no need to replace the bulbs.
No ballast.
No reflector.

Full Spectrum LED plant Grow Light and High Value View

Item Display

Advantages

Plug with listed certificate safe to use.

Application

Fruit and Vegetables Growing
Flowers Growing
Special Crops Growing
Leaf and Seeding Growing

Our Quality Control systems and after-sales

Package

Why Choose us?

Cooperative Policy:
Providing production schedule photos to ensure you know every process.
Profrssional follow-up team, one-to-one service in time.
Shipment sample for checking before shipment.
Priority to get the our lastest product information after cooperation
Good after-sale service offered, please send us feedback if you have any questions

Low Risk Promise:
Sample 3pcs: Lead time 3 working days.
500pcs order: lead time 5~8working days
10000pcs order: Lead time 20~28working days

Warmly welcome to take a visit on our factory at any time and we can pick you up.

Vegetable Garden Led Grow Lights,Vegetable Garden Plant Grow Lights,High-Power Led Plant Light,High Power Led Grow Light

Shenzhen Phlizon Technology Co.,Ltd. , https://www.szledaquariumlighting.com